User`s guide

AT-S45 User’s Guide

The System IP Configuration Menu in Figure 6 is displayed.

Figure 6 System IP Configuration Menu

3. From the System IP Configuration Menu, type D to select

Enable/Disable DHCP Mode.

The following prompt is displayed:

Enable or Disable DHCP mode (E/D)>

4. Enter E to enable or D to disable the protocol. The default setting is

disabled.

Changes are immediately activated on the switch.

AT-9410GB Local Management System

Enter the character in square brackets to select option

Basic Switch Configuration -> System IP Configuration Menu

MAC Address: 00:30:AB:00:09:20

IP Address: 149.35.19.168

Subnet Mask: 255.255.253.0

Default Gateway: 149.35.19.1

DHCP Mode: Disabled

------------------- <COMMAND> ------------------

Set [I]P Address

Set Subnet [M]ask

Set Default [G]ateway

Enable/Disable [D]HCP Mode

[Q]uit to previous menu

Command>