User`s guide

AT-S45 User’s Guide
32
Configuring System Administration Information
The procedure in this section explains how to assign a name to the
switch, along with other optional information, such as the name of the
administrator responsible for maintaining the unit and the location of
the switch.
To set the name, contact or location information on a switch, perform
the following procedure:
1. From the Main Menu, type A to select the System Administration
Configuration.
The System Administration Configuration Menu in Figure 5 is
displayed.
Figure 5 System Administration Configuration Menu
2. Change the parameters as desired. The commands for changing the
parameters are described below.
Set System [N]ame
This command sets a name for the switch (for example, Sales
Ethernet switch). This parameter is optional.
AT-9410GB Local Management System
Enter the character in square brackets to select option
Basic Switch Configuration Menu -> System Admin. Configuration Menu
Description: AT-9410GB
Object ID: 1.3.6.1.4.1.207.1.4.52
Name:
Location:
Contact:
-------------------------- <COMMAND> -----------------------------
Set System [N]ame
Set System [L]ocation
Set System [C]ontact Information
[Q]uit to previous menu
Command>