User`s guide

AT-S45 User’s Guide
226
Activating Broadcast Storm Control and Setting a Threshold
To activate storm control and set a threshold, perform the following
procedure:
1. On the Home page, select the Advanced Config menu tab and then
select Storm Control from the sub-menu.
The Broadcast Storm Control page will appear, as displayed in
Figure 87.
Figure 87 Broadcast Storm Control Window
2. From the Storm Control Status pull-down menu, select the Enable
option.
3. To set the threshold, select an option from the Threshold value pull-
down menu: Low, Medium, or High. If you do not select a threshold
value, the switch will retain the default setting of Low.
Note
For an explanation of broadcast storm control threshold values,
please Storm Control Overview on page 132.
4. Click the Apply button located below the pull-down menus to save
your configuration options.