User`s guide

AT-S45 User’s Guide
214
Viewing the MAC Addresses of a VLAN
The procedure in this section can be useful if you created VLANs on the
switch and want to view the MAC addresses of the nodes of a particular
VLAN. (This procedure is not of much value if the switch contains only
the Default VLAN, in which case displaying the entire MAC address table,
as explained earlier in this chapter, produces the same result.)
Note
To perform this procedure, you need to know the VID number of the
VLAN whose MAC addresses you want to view.
Note
Viewing MAC Addresses by VLAN is not supported in port-based
VLAN mode.
To view the MAC addresses of a VLAN on the switch, perform the
following procedure.
1. On the Home page, select the Basic Config menu tab and then select
the Forwarding DB tab from the sub-menu. Select Sort by VLAN
from the next sub-menu.
The Forwarding Database Configuration - Sort by VLAN window
will appear, as displayed.
Figure 81 Forwarding Database Configuration - Sort by VLAN Window