User`s guide

AT-S45 User’s Guide
211
Viewing the MAC Address by Port
This section contains the procedure for viewing the dynamic MAC
addresses that have been learned on a particular port. You can also use
this procedure to view any static MAC addresses that have been
assigned to a port.
1. On the Home page, select the Basic Config menu tab and then select
the Forwarding DB tab from the sub-menu. Select Sort by Port from
the next sub-menu.
The Sort by Port window will appear, as displayed.
Figure 79 Sort by Port Window
2. Select the port whose static and dynamic MAC addresses you want to
view from the Port Number pull-down menu.
3. Select Apply from the menu next to the Port Number.
A window is displayed with the MAC addresses of the nodes on
the port. The columns in the window and the definitions of the
columns are the same as for the Display MAC Address by MAC
window on page 111.