User`s guide

AT-S45 User’s Guide

SNMP Management Session

Another way to remotely manage an AT-9410GB switch is with an SNMP

management program. A familiarity with Management Information Base

(MIB) objects is necessary to manage a switch with an SNMP

management program.

The AT-S45 software supports the following MIBs:

❑ SNMP MIB-II (RFC 1213)

❑ Bridge MIB (RFC 1493)

❑ Interface Group MIB (RFC 1573)

❑ Ethernet MIB (RFC 1643)

❑ Remote Network MIB (RFC 1757)

❑ Allied Telesyn managed switch MIB

You must download the Allied Telesyn managed switch MIB file from the

Allied Telesyn web site and compile the file with your SNMP program.

For instructions, refer to your SNMP management documentation.

Note

You must assign an IP address to each switch that you want to

manage with an SNMP program.