User`s guide

AT-S45 User’s Guide
208
Resetting the VLAN Parameters to Default
This command deletes all VLANs that you created. All ports are returned
back to the Default VLAN.
To return the VLAN parameters of the switch to their default settings,
perform the following procedure:
1. Click on the Advanced Config menu tab and select VLAN Config
from the sub-menu. Select VLAN Info from the next sub-menu.
The VLAN Information page in Figure 78 is displayed.
Figure 78 VLAN Information
2. Click on the Reset to Default button on the right side of the page.
A confirmation prompt is displayed.
3. Click the OK button.