User`s guide

AT-S45 User’s Guide
207
Setting GVRP Status
Note
Global GVRP is not supported in port-based VLAN mode.
To set the GVRP status, perform the following procedure:
1. Click on the Advanced Config menu tab and select VLAN Config
from the sub-menu. Select VLAN Info from the next sub-menu.
The VLAN Information page in Figure 77 is displayed.
Figure 77 VLAN Information
2. Click on the Global GVRP pull-down menu, select Enable.
Note
The default is disable.
3. Click the Apply button.