User`s guide

AT-S45 User’s Guide
204
Note
The ports that you add to the new VLAN are not removed from their
current VLAN assignments. You must remove the ports manually
from the other VLANs if you do not want them to be shared. For
instructions, refer to Viewing or Modifying a Port-based VLAN on
page 205.
5. Click Apply. This will save the VLAN you have just created and make
it visible in the VLAN Info Menu.
Note
There are two additional buttons in the bottom right-hand corner of
the page. The Restore button will cancel any changes you have
made to the VLAN since using the Apply button. The Clear button
removes all check marks from all check boxes, letting you re-start
the port selection process.
You can repeat this procedure to create additional port-based VLANs.