User`s guide

AT-S45 User’s Guide
203
Creating a Port-based VLAN
To create a new port-based or VLAN, perform the following procedure:
Note
This procedure assumes that the switch is already running in the
Port-based VLAN mode. For instructions on how to change the
VLAN mode of the switch, refer to Setting the VLAN Type on page
209.
1. On the Home page, select the Advanced Config menu tab and then
select VLAN Config from the sub-menu. Select VLAN Create from
the next sub-menu.
The Create/Modify VLAN page in Figure 72 is displayed.
Figure 74 Create/Modify VLAN
2. Enter a unique VID in the Index field for the new VLAN. The VID can be
between 2 and 4094.
Since the switch does not examine the VID in tagged headers of
tagged frames when operating in the Port-based VLAN mode, this
VID value does not need to be unique from all other VLANs in your
network. It only needs to be unique from the other VLANs in the
switch on which you are creating the VLAN.
3. Enter a name for the new VLAN in the VLAN Name field. The VLAN
name can contain 0 to 32 characters.
The name can contain spaces, but not special characters, such as
asterisks (*) or exclamation points (!). Then press Enter.
4. Click the ports from the Port Number Member field which you want
to add to the new VLAN.
The VLAN must include at least one port.