User`s guide

AT-S45 User’s Guide
202
Deleting a Tagged or Untagged VLAN
To delete a VLAN, perform the following procedure:
1. On the Home page, select the Advanced Config menu tab and then
select VLAN Config from the sub-menu. Select VLAN Info from the
next sub-menu.
The VLAN Information page in Figure 72 is displayed.
Figure 72 VLAN Information
2. Click the Delete option located to the right of the VLAN you want to
delete.
A confirmation prompt is displayed in Figure 73.
Figure 73 Confirmation Prompt
3. Click OK.
The VLAN is removed from the switch. The PVIDs of the untagged
ports in the VLAN are changed to 1, making the ports untagged
members of the Default VLAN.
Note
You cannot delete the Default VLAN, which has a VLAN ID of 1.The
Default VLAN is a permanent VLAN.