User`s guide

AT-S45 User’s Guide

199

Note

You cannot add untagged ports to a VLAN from this window. To add

untagged ports, refer to Phase 2, below.

4. If you want to remove a tagged port from the VLAN, click the

Not Member radio button of the appropriate port.

Note

You cannot remove untagged ports from a VLAN from this window.

To remove untagged ports, refer to Phase 2, below.

5. If GVRP has been activated on the switch and you do not want the

switch to learn new VLANs on a particular tagged port, click the

Forbidden radio button of the appropriate tagged port.

6. After you have made the desired changes to the VLAN, click the

Apply button.