User`s guide

AT-S45 User’s Guide
198
The VLAN Create/Modify (802.1Q VLANs) in Figure 70 is displayed.
Figure 70 VLAN Create/Modify (802.1Q VLANs)
The rows on the page are defined below:
Tagged
A dot in a radio button indicates the corresponding port is a
tagged member of the VLAN. For example, referring to the figure
above, ports 9 and 10 on the master switch are tagged members
of the VLAN.
Untagged
A ‘U’ for a port indicates that the port is an untagged member of
the VLAN. For example, referring to the figure above, ports 1
through 8 on the master switch are untagged members of the
VLAN.
Dynamic
tbd
Forbidden
A dot in a radio button indicates that the switch will not learn
VLANs from the end node connected to the port. This applies only
to tagged ports and only when GVRP has been activated on the
switch.
Not Member
A selected radio button in this row indicates that the port is not a
member of the VLAN.
3. To add a tagged port to the VLAN, click the Tagged radio button of
the appropriate port.