User`s guide

AT-S45 User’s Guide
197
Viewing or Modifying a Tagged or Untagged VLAN
There are two phases to modifying a VLAN. You might need to perform
both phases or just one, depending on what it is you want to change in
the VLAN. The phases are:
❑ Phase 1: In this phase, you can view a VLAN’s configuration, as well
as change a VLAN’s name and add or remove tagged ports.
❑ Phase 2: In this phase, you can add or remove untagged ports.
Phase 1 This phase explains how to display the Config VLAN Member Menu of a
VLAN. This window displays a VLAN’s configuration. You can also use the
window to change a VLAN’s name and add or remove tagged ports.
Note
If you do not want to change a VLAN’s name or add or remove
tagged ports, then skip this procedure and go straight to Phase 2 to
add or remove untagged ports.
1. On the Home page, select the Advanced Config menu tab and then
select VLAN Config from the sub-menu. Select VLAN Info from the
next sub-menu.
The VLAN Information page will appear in Figure 69 as displayed.
Figure 69 VLAN Information (802.1Q VLANs)
This window lists all of the tagged and untagged VLANs on the
switch.
2. Click the Modify option located to the right of the VLAN you want to
modify.