User`s guide

AT-S45 User’s Guide
193
Creating a Tagged or Untagged VLAN
The procedure for creating a new VLAN is divided into the following
phases:
❑ Phase 1: Assigning a VID and name and specifying the port
members
❑ Phase 2: Converting tagged ports into untagged ports
Performing Phase 1 is required whenever you create a new VLAN. Every
VLAN must have a name, VID, and, of course, ports. You will need to
perform Phase 2 if some or all of the ports of a VLAN will be untagged
ports. Ports that you want to function as untagged ports must be
converted by changing their PVIDs, as explained in Phase 2.
To create a new VLAN, start by performing the procedure in Phase 1.
Phase 1 This phase assigns a VID and a name to your VLAN, and also designates
the VLAN port members.
1. On the Home page, select the Advanced Config menu tab and then
select VLAN Config from the sub-menu. Select Create VLAN from
the sub-menu.
The Create/Modify VLAN page will appear, as displayed in Figure
67
Figure 67 Create/Modify VLAN