User`s guide

AT-S45 User’s Guide
180
4. If you selected the Limit security level, set a threshold for the
maximum number of dynamic MAC addresses the port can learn. The
default threshold is 1. Enter the number of dynamic MAC addresses
(between 1 and 170) in the threshold field you want the port to be
able to learn.
Note
A threshold cannot be set for the port if the security level is set to
Normal or Secure.
5. To control what happens on the port once the threshold has been
met, check one of the radio buttons next to the intrusion detection
Notification options.
The options are:
❑ No action
❑ Disable the port only
❑ Notify with trap only
❑ Notify with trap and disable the port
6. To configure the security for another port, select the port number
from the Port pull-down menu at the top of the Port Security page
and repeat this process.
7. To verify the new port security configurations and to see the security
settings for all of the ports at once, continue to the next section,
Displaying Port Security Settings on page 181.