User`s guide

AT-S45 User’s Guide
179
Configuring Port Security
To configure the switch’s port security, perform the following procedure:
1. From the Home page, select the Advanced Config menu tab and
then select the Port Security tab in the sub-menu. Select Security
Config from the next sub-menu.
The Port Security window in Figure 61 as displayed.
Figure 61 Port Security Window
2. Select the port whose security you would like to configure from the
Port pull-down menu.
3. Select a security level for the port by checking one of the radio
buttons below Security Mode: The options are Normal, Limit, and
Secure. For a description of these security levels, refer to Port
Security Overview on page 57.
Note
The default Security Mode is Normal.