User`s guide

AT-S45 User’s Guide
175
Speed Mode
The operating speed and duplex mode of the port. Possible
settings for this parameter are:
❑ Auto-Negotiate: The port will Auto-Negotiate both speed and
duplex mode. This is the default.
❑ 1000Mbps - Half Duplex
❑ 100Mbps - Full Duplex
❑ 10Mbps - Full Duplex
❑ 1000Mbps - Half Duplex
❑ 100Mbps - Half Duplex
❑ 10Mbps - Half Duplex
Flow Control
The port’s flow control setting. Possible values are:
Enable - Flow control is activated on the port.
Disable - No flow control on the port.
MAC Address
This specifies the MAC address of the port.
Priority
This parameter applies only when the switch is using STP. The
parameter is used as a tie breaker when two or more ports have
equal costs to the root bridge. The range is 0 - 255.
Path Cost
This parameter applies only when the switch is using STP. This
parameter is used in deciding which port has the lowest cost to
the root bridge.