User`s guide

AT-S45 User’s Guide
174
The Configuration of a Port window in Figure 59 is displayed.
Figure 59 Configuration of a Port Window
This window displays the port’s configuration and operating
status.
Set the port parameters as desired. You can set a parameter by
clicking in field you desire to modify. The parameters are
described below.
Port Type
This number specifies the maximum operating speed of the port.
This parameter can not be changed.
Operation Status
The status of the link between the port and the end node
connected to the port. Possible values are:
Up - indicates that a valid link exists between the port and the end
node.
Down - indicates that the port and the end node have not
established a valid link.
Admin. Status
The current operating status on the port. Possible values are:
Enabled - Indicates that the port is enabled.
Disabled - Indicates that the port is disabled.