User`s guide

AT-S45 User’s Guide
164
Viewing the AT-S45 Version Number and Switch MAC Address
To view basic information about the switch, perform the following
procedure:
1. From the Home page, select General Info. and then select
Switch Info. from the sub-menu.
The Switch Information page in Figure 53 is displayed.
Figure 53 Switch Information
This page is for viewing purposes only. You cannot change any of
the values from this window. The sections in the window are
defined below.
Hardware Information
This section displays the switch’s current software version, DRAM
size, flash size, and console baud rate.
Administration Information
This section displays the switch’s name, location and contact
information. These values are defined in the procedure
Configuring System Administration Information on page 154,
which also explains how to change the parameters.