User`s guide

AT-S45 User’s Guide
156
Setting the User Interface Configuration
The procedure in this section explains how to set the user interface
security features of the switch, including idle timeouts, how to enable
and disable the different management session options, and how to
change the user name and password for the switch.
To set a switch’s user interface configuration, perform the following
procedure:
1. From the Home Page, select Basic Config. and then select
User Interface from the sub-menu.
The User Interface page in Figure 49 is displayed.
Figure 49 User Interface
2. Change the parameters as desired.
The parameters in the User Interface Configuration window are
described below:
Console UI Idle Timeout
This parameter causes the management software to
automatically end a management session if it does not detect any
activity from the local management station after the specified
period of time. This security feature can prevent unauthorized
individuals from using your management station should you step
away from your system while configuring a switch. The default for
the console timeout value is 5 minutes.You can set the timeout for
between 0 and 60 minutes.