User`s guide

AT-S45 User’s Guide
154
Configuring System Administration Information
To set the switch name for an AT-9410GB Gigabit Ethernet switch,
perform the following procedure:
1. From the Home Page, select Basic Config. and then select
Admin. Config. from the sub-menu.
The Administration Configuration menu in Figure 48 is displayed.
Figure 48 Administration Configuration menu
2. Change the parameters as desired.
The parameters are described below:
System Description
This parameter specifies the model name of the switch. This
parameter cannot be changed.
System Object ID
This parameter specifies the numeric ID of the switch. This
parameter cannot be changed.
System Name
This parameter specifies a name for the switch (for example, Sales
Ethernet switch). Entering a value for this parameter is optional.