User`s guide

AT-S45 User’s Guide
145
Set [R]etry Count
The amount of times your system will try to download the image using
FTP. The Set Retry Count range is 1 - 20. The default setting is 5.
5. Open a TFTP client to download the software image onto the switch.
Once the TFTP software is opened, it immediately begins to listen
for incoming requests and the syslog server is running.
Steps 5 and 6 illustrate how to perform the transfer using the
Tftpd32 by Ph. Jounin program.
6. Using the TFTP client, select the current directory where the software
image is located.
Figure 44 TFTP client software window
7. Return to the local management software upgrade menu as
displayed in Figure 43.
8. Type U to select Upgrade Image and Reboot.
The following prompt is displayed:
Download file (Y/N)>
9. Type Y to select Yes.
The software immediately begins to download onto the switch’s
CPU. This process will take seconds to complete.
Once the new software download process has completed, the
switch begins to initialize the software. This takes approximately
1 minute to complete. Once the initialization process is complete,
the switch will automatically reboot.