User`s guide

AT-S45 User’s Guide
144
The TFTP Software Upgrade Menu is displayed.
Figure 43 TFTP Software Upgrade Menu
You will need to provide the following information when using the
TFTP client software to download the AT-S45 software image. The
options in the window are defined below.
Set TFTP [S]erver IP Address
Sets the IP address of the server which holds the image file.
Set Image [F]ile Name
Sets the path and filename of the software that is to be downloaded
onto the switch. The filename of the software should be “ATS45.img”. If
necessary, change the filename of the image.
[U]pgrade Image and Reboot
Upgrades the new image to your switch and reboots the switch.
Note
Do not begin the upgrade until you have configured the TFTP
client.
AT-9410GB Local Management System
Enter the character in square brackets to select option
Main Menu -> Software Upgrade Menu
Image Version/Date: 1.00E/Jan 15 2002 19:48:12
TFTP Server IP: 149.35.19.3
Image File Name: AT9410_v100E.rom
Retry Count: 5
----------------------- <COMMAND> --------------------------
Set TFTP [S]erver IP Address
Set Image [F]ile Name
[U]pgrade Image and Reboot
Set [R]etry Count
[Q]uit to previous menu
Command>