User`s guide

AT-S45 User’s Guide
142
The Send File pop-up window is displayed.
Figure 41 Send File Window
9. Click the Browse button on the Send File window to specify the
location of the switch’s image file.
10. Click on the Protocol field and set to 1K Xmodem transfer protocol.
11. Click Send.
The software immediately begins to download onto the switch’s
CPU. As this process begins, the Xmodem File Send window
displays the current status of the software download. This process
will take approximately 12 minutes to complete.
The XModem File Send window is displayed.
Figure 42 XModem File Send Window
Once the new software download process has completed, the
switch begins to initialize the software. This takes approximately
1 minute to complete. Once the initialization process is complete,
the switch will automatically reboot.
Note
Do not interrupt the initialization process.