User`s guide

AT-S45 User’s Guide
133
Activating Broadcast Storm Control
To activate the Broadcast Storm control feature, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type C to select Storm
Control Configuration Menu.
The Broadcast Storm Control window in Figure 37 is displayed.
Figure 37 Broadcast Storm Control Window
3. Type B to Select Set the Broadcast Status.
The following prompt is displayed:
Enable or Disable Broadcast Storm Control (E/D)>
4. Type E to enable Broadcast Storm Control or D to disable it. The
default setting is disabled.
5. If you enabled Broadcast Storm Control, type T to set Threshold.
The following prompt is displayed:
Enter Threshold Level >
The values available for the threshold level are:
❑ Low (1000 64-byte packets per second)
❑ Medium (2000 64-byte packets per second)
AT-9410GB Local Management System
Enter the character in square brackets to select option
Basic Switch Configuration -> Storm Configuration Menu
Broadcast Storm Status: Enabled
Threshold : Low
----------------------------- <COMMAND> ----------------------------
Set [B]roadcast Status
Set [T]hreshold
[Q]uit to previous menu
Command>