User`s guide

AT-S45 User’s Guide
129
Viewing Group Members
You can use the AT-S45 software to list the ports on the switch with host
nodes of each multicast group. To display the list, perform the following
procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type I to select IGMP
Snooping Configuration Menu.
3. From the IGMP Snooping Configuration window, type V to select
View Group Members.
The following prompt is displayed:
Enter VLAN ID>
4. Enter the VLAN ID number.
The following prompt is displayed:
Enter IP address>
5. Enter a multicast address.
The View Group Members Menu in Figure 36 is displayed.
Figure 36 View Group Members Menu
AT-9410GB Local Management System
Enter the character in square brackets to select option
IGMP Configuration Menu -> View Group Members Menu
VLAN ID: 3 Multicast group address: 224.0.1.22
Group members
-------------------------------------------------------------------
3
----------------------------- <COMMAND> -----------------------------
[Q]uit to previous menu
Command>