User`s guide

AT-S45 User’s Guide
119
Deleting Static MAC Addresses
To delete a static MAC address, perform the following procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database Menu.
3. From the Forwarding Database menu, type S to select Static Address
Table Menu.
4. From the Static Address Table Menu, type D to Delete Entry.
The following prompt is displayed:
Enter MAC Address(xx:xx:xx:xx:xx:xx) >
5. Enter the static MAC address in the following format:
xx:xx:xx:xx:xx:xx
Once you have specified the MAC address, the following prompt
is displayed:
Delete entry->Enter VLAN ID>
VLAN ID is in range of 1 to 4094
6. Enter the VID of the VLAN where the port to which the static address
was assigned is a member.
Once you have specified the VLAN ID, the management software
deletes the static address from the MAC address table.
7. Repeat steps 4 to 6 to delete additional static MAC addresses.