User`s guide

AT-S45 User’s Guide
117
Viewing the MAC Addresses of a VLAN
The procedure in this section can be useful if you created VLANs on the
switch and want to view the MAC addresses of the nodes of a particular
VLAN. (This procedure is not of much value if the switch contains only
the Default VLAN, in which case displaying the entire MAC address table,
as explained earlier in this chapter, produces the same result.)
Note
To perform this procedure, you need to know the VID number of the
VLAN whose MAC addresses you want to view.
To view the MAC addresses of a VLAN on the switch, perform the
following procedure.
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database Menu.
3. From the Forwarding Database menu, type V to select Display MAC
Address by VID.
The following prompt is displayed:
Enter VLAN ID>
VLAN ID is in range of 1 to 4094
4. Enter the VID of the desired VLAN and press Return.
The management software displays a window with a list of the
MAC addresses of the nodes in the VLAN. For an example of the
window and for definitions of the columns, refer to the Display
MAC Address by MAC window on page 114.