User`s guide

AT-S45 User’s Guide
115
Viewing MAC Addresses by Port
This section contains the procedure for viewing the dynamic MAC
addresses that have been learned on a particular port. You can also use
this procedure to view any static MAC addresses that have been
assigned to a port.
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database Menu.
3. From the Forwarding Database Menu, type P to select View MAC
Addresses by Port.
The following prompt is displayed:
Enter port number >
Port number is in range of 1 to 12
4. Enter the number of the port whose static and dynamic MAC
addresses you want to view and press Return.
A window is displayed with the MAC addresses of the nodes on
the port. The columns in the window and the definitions of the
columns are the same as for the Display MAC Address by MAC
window on page 114.