User`s guide

AT-S45 User’s Guide
114
Figure 33 is an example of the Display MAC Address by MAC
window, which displays both static and dynamic MAC addresses
in numerical order.
Figure 33 Display MAC Address by MAC Window
The information is for viewing purposes only, except for the
Set Age-Out Time. The columns in the window are defined below.
MAC Address
The MAC address of the node connected to the switch.
Port
The port on the switch where the MAC address was learned.
Set [A]ge-Out Time
This allows you to manually set the MAC aging time. The range is
10 to 1048 seconds. The default setting is 300.
AT-9410GB Local Management System
Enter the character in square brackets to select option
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address Port
----------------- ----
00:06:5B:23:0F:7E 3
00:08:C7:73:71:F5 3
00:10:40:00:DC:D7 3
00:10:40:02:00:FE 3
00:12:CD:00:12:23 9
00:30:AB:00:09:20 CPU
00:30:AB:00:09:21 1
00:30:AB:00:09:22 2
00:30:AB:00:09:23 3
00:30:AB:00:09:24 4
-------------------------- <COMMAND> ---------------------------
[N]ext Page Set [A]ge-Out time
[P]revious Page [Q]uit to previous menu
Command>