User`s guide
AT-S45 User’s Guide
109
Setting the VLAN Type
The AT-9410GB switch can operate in either the 802.1Q VLAN mode, for
creating tagged and untagged VLANs, or the port-based VLAN mode.
Note
The VLAN Type default is 802.1Q.
To change the VLAN mode, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
3. From the VLAN Management Menu, type T to select Set VLAN Type.
The following prompt is displayed.
Set VLAN type (P/8)>
4. Enter P for the Port-based VLAN mode or 8 for the 802.1Q VLAN
mode.
Note
Changing the VLAN type setting deletes all tagged and untagged
VLANs created in the 802.1Q VLAN mode.