User`s guide

AT-S45 User’s Guide
108
Resetting the VLAN Parameters to Default
This command deletes all VLANs that you created. All ports are returned
back to the Default VLAN.
To return the VLAN parameters of the switch to their default settings,
perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
3. From the VLAN Management Menu, select R for Reset VLAN to
Default.
The following prompt is displayed.
Are you sure you want to reset VLAN configuration to
factory default (Y/N)>
Y for Yes; N for No
4. Type Y to select Yes.
The following prompt is displayed.
Are you sure you want to reset VLAN configuration to
factory default (Y/N)>
Reset to factory default completed, press any key to
continue...
The default VLAN settings are immediately activated on the
switch and displayed in the VLAN Management Menu.