User`s guide

AT-S45 User’s Guide
107
Setting GVRP Status
Note
Global GVRP is not supported in port-based VLAN mode.
To set the GVRP status, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
3. From the VLAN Management Menu, select G for Set GVRP Status.
The following prompt is displayed.
Enable or Disable GVRP status (E/D)>
E for Enable; D for Disable
4. Type E to select Enable.
The default setting is Disabled.
The GVRP Status in the VLAN Management Menu is immediately
changed to reflect the new setting.