User`s guide

AT-S45 User’s Guide
105
Modifying a Port-based VLAN
The following procedure explains how to change the name of a port-
based VLAN, as well as add or remove ports.
To modify a port-based VLAN, perform the following procedure:
1. From the Main Menu, type A to select the Advanced Switch
Configuration Menu.
2. From the Advanced Switch Configuration Menu, type V to select
VLAN Management.
3. From the VLAN Management Menu, select O for the Config VLAN
Member option.
The following prompt is displayed:
Enter VLAN ID>
4. Enter the VID of the VLAN you want to view or modify.
The Config VLAN Member Menu for the VLAN is displayed. This
VLAN contains all the current information about the VLAN. An
example is shown in Figure 26.
Figure 31 Config VLAN Member Menu
AT-9410GB Local Management System
VLAN MAnagement-> Config VLAN Member Menu
VLAN ID: 3 VLAN Name: Engineering
Group Members
------------------------------------------------------
1, 2, 3, 4, 5
------------------------------Command----------------------------
[N]ext Page [C]hange VLAN Name [A]dd VLAN Member
[P]revious Page [M]odify Participation [R]emove VLAN Member
[Q]uit to previous menu
Command> _
Enter the character in square brackets to select option