User`s guide

AT-S45 User’s Guide
104
5. Enter a unique VID for the new VLAN. The VID can be between 2 and
4094. Press Enter.
Since the switch does not examine the VID in tagged headers of
tagged frames when operating in the Port-based VLAN mode, this
VID value does not need to be unique from all other VLANs in your
network. It only needs to be unique from the other VLANs in the
switch on which you are creating the VLAN.
6. Type N to select the Set VLAN Name option and enter a VLAN name
using 0 to 32 characters.
The name can contain spaces, but not special characters, such as
asterisks (*) or exclamation points (!). Then press Enter.
7. Type S to Select Port Members for the new VLAN.
You can specify the ports individually (e.g., 2,3,5), as a range (e.g., 7-9),
or both (e.g., 2,5,7-9)
The VLAN must include at least one port.
Note
The ports that you add to the new VLAN are not removed from their
current VLAN assignments. You must remove the ports manually
from the other VLANs if you do not want them to be shared. For
instructions, refer to Modifying a Port-based VLAN on page 105.
8. Type A to select Apply. This will save the VLAN you have just created
and make it visible in the VLAN Management Menu.
You can repeat this procedure to create additional port-based VLANs.