User`s guide

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
6.8 AT-8700XL/AT-8800/Rapier Series
Topics:
• VLAN Information Window
• Add/Modify VLAN Dialogs
6.8.1 VLAN Information Window
The VLAN Information Window displays the following attributes for each VLAN definition:
Column Name Description
Name This is the name of the VLAN.
Identifier This is the unique identifier of the VLAN.
Tagged Ports This is a list of the tagged member ports of the VLAN.
Untagged Ports This is a list of the untagged member ports of the VLAN.
Protected
This indicates whether or not the VLAN is protected.
• Yes
• No
Status
This indicates the status of the VLAN.
• dynamic
• static
Note - After an Import VLAN operation, the default VLAN definition will have a failed status if one
of its ports is not associated with any other VLAN definitions. This is caused by the way the Import
VLAN operation works. The Import VLAN operation deletes the existing VLAN configuration on
the target device. Afterwards, VLAN Manager adds the VLAN definitions from the VLAN
Definition File in a sequential manner, starting with the Default VLAN definition. The problem will
occur if the VLAN Definition File contains VLAN definitions (other than the Default VLAN) that
have untagged ports. When the default VLAN definition with the missing untagged ports is added,
the target device will return an error since there are no existing VLAN definitions that have the
missing untagged ports.
6.8.2 Add/Modify VLAN Dialogs
The Add/Modify VLAN Dialogs have the following Input Fields:
PN 613-50595-00 Rev B Page 43 of 48