User`s guide

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
5.1 File
The File menu lets you connect to and disconnect from a target host, check the properties of the
target host, or exit VLAN Manager.
Topics:
• Open
• Close
• Properties
• Exit
5.1.1 Open
This option allows you to specify a target host to connect to. When you select File > Open, the
following dialog box appears. To connect to the device, fill in parameters in the dialog box, and click
OK.
Note - This option is not available if VLAN Manager is already connected to a target host.
PN 613-50595-00 Rev B Page 15 of 48