Install guide

AT-9006 Quick Install Guide
9
Switch LEDs
Table 2 and Table 3 describe the functions of the LEDs on the Ethernet
switch.
Table 2
Power and Fault LEDs
Table 3
Port LED Status
For information on troubleshooting the switch, refer to the AT-9006SX/SC
and AT-9006LX/SC Installation Guide.
LEDs State Description
Fault Solid Red The switch or management software is malfunctioning.
Flashing Red The switch is booting, running diagnostic tests, writing
images to FLASH, or transferring files using XMODEM.
OFF Normal operation.
RPS Solid Green The RPS is connected to the switch. To verify that the
RPS is operating correctly, refer to your RPS manual.
Power Solid Green The switch is receiving power, voltage is within the
acceptable range, and the power supply is working.
LEDs State Description
Link/Activity Solid Green This indicates a link.
Flashing Green This indicates activity.
Duplex/Collision Solid Green The port is operating at full-duplex.
Solid Amber The port is operating at half-duplex.
Flashing Amber Collisions are occuring on the line.