Specifications
Table Of Contents
- AT-8900 Series Hardware Reference
- Contents
- Models Covered By This Reference
- Why You Should Read This Reference
- Where To Find More Information
- Hardware Description
- Online Documentation
- AT-TFTP Server
- Using Windows Terminal and Windows Hyperterminal
- Switch Start-up
- RS-232 Terminal Port (ASYN0)
- Useful Cables
- Test Facility
- Power Supply Units (PSUs)
- Port, Connector, and Cable Combinations
- Troubleshooting
- Expansion Options
- Restricted Procedures
- Contacting Us
22 AT-8900 Series Switch
C613-03075-00 REV A
Other Interface Tests
Refer to the Test Facility of the AT-8900 Series Software Reference for information
on testing other interfaces.
If a test fails, please contact your Authorised Allied Telesyn distributor or reseller.
port27 no test - - - - - -
port28 no test - - - - - -
port29 no test - - - - - -
port30 no test - - - - - -
port31 no test - - - - - -
port32 no test - - - - - -
port33 no test - - - - - -
port34 no test - - - - - -
port35 no test - - - - - -
port36 no test - - - - - -
port37 no test - - - - - -
port38 no test - - - - - -
port39 no test - - - - - -
port40 no test - - - - - -
port41 no test - - - - - -
port42 no test - - - - - -
port43 no test - - - - - -
port44 no test - - - - - -
port45 no test - - - - - -
port46 no test - - - - - -
port47 no test - - - - - -
port48 no test - - - - - -
port49 no test - - - - - -
port50 no test - - - - - -
port51 no test - - - - - -
port52 no test - - - - - -
asyn0 no test - - - - - -
--------------------------------------------------------------------------------
Figure 8: Example output for the SHOW TEST COUNT command (Continued).