Specifications
Table Of Contents
- AT-8900 Series Hardware Reference
- Contents
- Models Covered By This Reference
- Why You Should Read This Reference
- Where To Find More Information
- Hardware Description
- Online Documentation
- AT-TFTP Server
- Using Windows Terminal and Windows Hyperterminal
- Switch Start-up
- RS-232 Terminal Port (ASYN0)
- Useful Cables
- Test Facility
- Power Supply Units (PSUs)
- Port, Connector, and Cable Combinations
- Troubleshooting
- Expansion Options
- Restricted Procedures
- Contacting Us
10 AT-8900 Series Switch
C613-03075-00 REV A
6. Click “ASCII Setup” to display the ASCII Setup dialog box. Uncheck:
• “Echo typed characters locally”.
• “Append line feeds to incoming line ends”.
Set other parameters as required.
• Click “OK” twice to close all dialog boxes.
7. Save the current session. From the File menu, select:
•“Save”.
This creates a connection icon with the name you assigned in the
HyperTerminal group. To use the configuration:
• Double-click the connection icon in the HyperTerminal group.
When the HyperTerminal window appears, press:
• [Enter] a couple of times.
The switch’s log in prompt will appear.