Specifications

Features in 291-08 94
Version 291-18
C613-10488-00 REV Q
CR00014330 Ping 3 The maximum value for the delay parameter of the ping command was
too long.
This issue has been resolved by changing the range for the delay from
0-4294967295 to 0-604800. This new maximum is the number of seconds
in one week.
YYYYYYYYYYY
CR00014879 Switching,
RSTP, SNMP
3 Previously, an incorrect value was returned for the port number when
responding to an SNMP Request for MIB object dot1dSTPRootPort.
This issue has been resolved.
- - - YYYYYYYY
CR00015466 Core, Install,
PoE
3 The output of the show cpu command on the AT-8624POE switch showed
relatively high CPU usage when the device was idle.
This issue has been resolved.
------Y----
CR00016183 File 3 If a user attempted to delete a locked file, such as the currently-installed
GUI resource file, the router or switch displayed both an operation error
message and an operation successful message.
This issue has been resolved by removing the incorrect operation successful
message.
YYYYYYYYYYY
CR00016429 OSPF 3 Previously, OSPF logged the same message for two separate errors. These
errors were when OSPF rejected a database description message because:
■ the neighbour was in a state of “down” or “attempt”, or
■ the MTU received from the neighbour was larger than the receiving
system could handle.
This issue has been resolved. Separate error log messages are now
generated for these two errors.
YYYYYYYYYYY
CR00016452 PPP 3 It is valid to use the command create ppp=number to create a PPP
interface without specifying the underlying layer 1 interface. However,
executing this command, or including it in a boot script, resulted in an error.
This issue has been resolved.
YYYYYY- - YYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800