Specifications

Features in 291-08 93
Version 291-18
C613-10488-00 REV Q
CR00014103 VRRP, GUI 3 The VRRP priority could not be modified through the GUI—the priority
option was there but did nothing.
This issue has been resolved.
YYYY- YYY- YY
CR00014137 PPP 3 A PPPoE Access Concentrator service that had been added by using the
acinterface parameter to specify a VLAN (or by using the deprecated vlan
parameter) could be deleted without specifying the acinterface parameter
(or the deprecated vlan parameter).
This issue has been resolved.
YYYYYY- - YYY
CR00014159 RSTP 3 RSTP (correctly) only uses the top 4 of the available 16 bits for the bridge
priority. If a user enters a value that is not a multiple of 4096, the switch
rounds the value down. Previously, the switch did not inform users when it
rounded the value.
This issue has been resolved. The switch now displays an info message
when it rounds the bridge priority.
Note that this only happens for RSTP. STP uses all 16 bits for the bridge
priority.
- - - YYYYYYYY
CR00014203 OSPF 3 When OSPF was disabled and a BGP redistribution definition existed, then
the obsolete command set ospf bgplimit=limit did not update the limit
in the BGP redistribution definition. This meant that the limit was incorrect
when OSPF was enabled again.
This issue has been resolved.
YYYYYY––YYY
CR00014304 LLDP 3 The help displayed for the LLDP port parameter (in such commands as
show lldp port=?) incorrectly indicated that the port parameter is a
“string 1 to 255 characters long”. The port parameter is instead an
Ethernet switch port number or a range of numbers.
This issue has been resolved. The help is now correct.
Y- YYYYYYYYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800