Specifications

Features in 291-08 92
Version 291-18
C613-10488-00 REV Q
CR00013543 DHCP 3 If a user attempted to add a policy option to a DHCP policy by using the set
command instead of the add command, then the resulting error message
did not clearly indicate the cause of the error.
For example, entering the command:
set dhcp policy=test arptimeout=234
resulted in the error message:
Error (3070061): ARPTIMEOUT not found.
This issue has been resolved. The error message now reads:
Error (3070279): Option ARPTIMEOUT was not found in policy test or
was not added using the ADD DHCP POLICY command.
YYYYYYYYYYY
CR00013635 Ping,
Traceroute
3 In the set trace command, it was possible to specify a minimum TTL value
that was higher than the maximum TTL value.
This issue has been resolved. The minttl and maxttl parameter are now
checked to ensure that the value of minttl is less than or equal to the value
of maxttl.
YYYYYYYYYYY
CR00013637 Ping,
Traceroute
3 If the value specified for the minimum time-to-live parameter (minttl) of
the traceroute command exceeded the value set for the maximum time-
to-live parameter (maxttl), the router or switch would attempt to execute
the trace rather than generate an error message.
This issue has been resolved.
YYYYYYYYYYY
CR00013832 EPSR, SNMP 3 When a user destroyed an EPSR domain, SNMP Requests returned
information about the domain even though it no longer existed.
This issue has been resolved.
--------YY-
CR00013920 Ping,
Traceroute
3 If a user attempted to perform a traceroute without specifying the address
to trace (either in the trace or set trace commands), the router or switch
attempted to trace 0.0.0.0.
This issue has been resolved. The router or switch now displays an error
message.
YYYYYYYYYYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800