Specifications

Features in 291-08 80
Version 291-18
C613-10488-00 REV Q
CR00016964 ISAKMP 2 When the router or switch negotiated an IPsec tunnel with RFC3947 NAT-
T, its NAT-OA payload had two bytes of reserved fields after the ID field
instead of the three bytes specified by RFC 3947. This could prevent the
tunnel from working properly when the tunnel was between an Allied
Telesis router or switch and some other vendor.
This issue has been resolved.
YYYYYY- - - - -
CR00016985 ATM 2 If a PPP instance was destroyed after an attached ATM channel had been
modified using the set atm channel command, the router rebooted. The
router could also reboot if an ATM channel was deleted under similar
circumstances.
This issue has been resolved.
Y----------
CR00016989 IPsec 2 AlliedWare IPsec would not interoperate with Microsoft Windows Vista
VPN clients. This was because Microsoft changed the IPSec behaviour in
Vista such that Vista's private local IP address is sent as the local
identification instead of an FQDN. When an IPSec tunnel between
AlliedWare and Vista was brought up, the hosts could not communicate.
This issue has been resolved. AlliedWare IPsec can now communicate with
peers that send their private local IP address as the local identification.
YYYYYY- - - - -
CR00017081 Classifier 2 The show classifier command did not allow users to display only the
classifiers that had their IP source address and MAC source address
parameters set to dhcpsnooping.
This issue has been resolved. For example, the command show classifier
ipsa=dhcpsnooping now displays those classifiers that have their IP
source address set to dhcpsnooping.
Also, it is no longer possible to create two identical classifiers with DHCP
snooping parameters.
--------YY-
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800