Specifications

Features in 291-08 77
Version 291-18
C613-10488-00 REV Q
CR00013893 MSTP 2 Executing the commands disable mstp port=number or enable mstp
port=number would not disable or enable the port on all MSTIs.
This issue has been resolved.
- - - YYYYYYY-
CR00013982 L2TP 2 An L2TP call could be deleted when still attached to the PPP interface.
Doing this caused the router or switch to reboot.
This issue has been resolved.
YYYYY- - - - - -
CR00014044 IGMP 2 When large numbers of multicast streams were passing through the switch
and there was no multicast routing protocol running (such as PIM or
DVMRP), the CPU would experience regular periods of extended high
utilisation. This could result in lost control packets and network instability.
This issue has been resolved.
----------Y
CR00014146 TTY 2 When a file was redirected (for example, by a trigger), if the mail hostname
was not available or not configured, the router or switch would reboot.
This issue has been resolved.
YYYYYYYYYYY
CR00014230 TTY 2 If the built-in editor was used to delete the last line of a file, the router or
switch could reboot.
This issue has been resolved.
YYYYYYYYYYY
CR00014295 IGMP 2 IGMP snooping would process IGMP protocol packets that had incorrect IP
TTL fields (i.e. that had values other than 1).
This issue has been resolved.
Y- YYYYYYYYY
CR00014320 OSPF 2 Occasionally, when OSPF was started, not all the Type-7 LSAs were
translated into Type-5 LSAs.
This issue has been resolved.
YYYYYYYYYYY
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800