Specifications

Features in 291-17 7
Version 291-18
C613-10488-00 REV Q
CR00022732 PIMv4 2 In normal PIM operation, assert messages are used between PIM
neighbours to determine which neighbour has the better route between a
multicast client and source. Once the exchange has occurred, the losing
neighbour informs the winning neighbour to remove its route from the
neighbour’s PIM routing table. The winning neighbour forwards the
multicast traffic and starts an assert timer that, when it expires, causes a
new assert exchange.
However, when the router or switch was the losing PIM neighbour, it would
not correctly respond to the new assert exchange, and it would fail to tell
the winning neighbour to prune its route from the neighbour’s routing
table. This meant that the winning neighbour would incorrectly transmit
multicast traffic to the losing neighbour.
This issue has been resolved.
YYYYYYY–YYY
CR00022932 IPsec 2 Previously, the router or switch could fail to create some IPsec tunnels if the
IPsec peer was specified using a DNS name (peeraddress=domainname)
in the create ipsec policy or set ipsec policy commands. This occurred
only when an ISAKMP policy was attached to the IPsec policy (with the
isakmppolicy parameter), and the ISAKMP policy also used the peer’s DNS
name to identify the peer.
This issue has been resolved.
YYYYYY––– ––
CR Module Level Description
AR44x / AR450 AR7x5 AR750S / AR770S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL AT-8948 / x900-48 AT-9900 AT-9800