Specifications

ManualsBrandsAllied Telesis ManualsConsumer electronicsAT-8948

Features in 291-11 62

Version 291-18

C613-10488-00 REV Q

Level 4

CR00019703 L2TP 3 When the router or switch was acting as an LNS, it was possible for it to get

into a state where it has an active and an inactive L2TP tunnel both tied to

one PPP connection. Previously, when the inactive tunnel timed out, the

router or switch closed the PPP connection. This situation with two L2TP

tunnels arose when the LAC removed the tunnel in a way that made it

unable to notify the LNS (for example, if there was a brief network outage

between the LNS and the LAC). Therefore the LNS kept the tunnel up.

When the LAC reactivated the call, it created a second tunnel tied to the

same PPP connection. This was because L2TP calls could be attached to PPP

connections which were already associated with an L2TP call and were

active.

This issue has been resolved. L2TP calls can no longer be attached to active

PPP connections that are already associated with an L2TP call.

YYYYYY––YYY

CR Module Level Description

AR400

AR7x5

AR7x0S

Rapier i

Rapier w

AT-8800

AT-8600

AT-8700XL

x900-48

AT- 9900

AT-9800

CR00012634 QoS, Switch 4 QoS sometimes marked traffic red when no metering parameters had been

specified and therefore all traffic should have been green. However, the

switch did not drop the red-marked traffic, because metering had not been

configured.

This issue has been resolved.

––––––––YY–

CR00013088 IPv6 4 When an ICMPv6 time exceeded packet was sent out, the InTimeExcds

counter was incremented, when the OutTimeExcds should have been

incremented.