Specifications

Features in 291-11 61
Version 291-18
C613-10488-00 REV Q
CR00018182 PKI 3 Previously, the PKI certificate timestamp was only verified at router or
switch initialisation. This caused problems when the time changed, for
example because of NTP or if the router or switch had no battery backup
(so the time defaulted to 01-Jan-1999 after a reboot). In either situation,
the timestamp updates were not communicated to the PKI certificate code
so the certificates remained valid or invalid depending upon the initial
timestamp check.
This issue has been resolved. PKI periodically verifies the certificate
timestamps and automatically validates or invalidates the certificate.
Also, the show pki command output has been updated to include all the
debug options (some were missing) and to improve the output.
YYYYYYYYYYY
CR00018431 Core 3 SNMP access to the MIB object ifInOctets on the Eth port of an AR770S
router did not get the actual updated value unless the value was first
refreshed with the show interface=eth counter command.
This issue has been resolved.
––Y––––––––
CR00019012 Firewall 3 On very rare occasions, the router or switch could reboot when running as
a firewall and using passive FTP.
This issue has been resolved.
YYYYYY––– –Y
CR00019020 GUI 3 In some circumstances, the VPN wizard did not recognise some bundle
licences. This issue affected firewall licence recognition.
This issue has been resolved.
Y––––––––––
CR00019575 Firewall 3 On rare occasions, the firewall rebooted when processing RTSP or FTP TCP
streams.
This issue has been resolved.
YYYYYY––– ––
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800