Specifications

Features in 291-11 56
Version 291-18
C613-10488-00 REV Q
CR00007870 IP Gateway 3 The following issues occurred with ICMP Router Advertisement:
■ When the feature was enabled, four initial advertisements were sent
instead of three, as defined in RFC 1256.
■ The advertisement counter was incremented incorrectly when
advertisements were sent on a down interface. This resulted in no
advertisements being sent at all.
■ If an advertisement interface was added and then deleted, the interface
could not be added again.
These issues have been resolved.
–––YYYYY––Y
CR00007880 LAPB, MIOX,
X25-T, Core
3 If the access link to an X.25 network was unstable and suffered outages
frequently, it was possible for X.25 calls to become locked up so that data
was not successfully transferred. When this happened, the call needed to
be manually taken down before normal operation would resume.
This issue has been resolved.
YYYYY––––––
CR00010517 Firewall 3 When the firewall deny event table filled up, the oldest deny event was
pushed out by the next new one, even if the old event had not finished.
This meant that the old attack was never recorded as having finished, and
prevented the firewall from recording that attack again, even after the
associated session had closed.
This issue has been resolved. The firewall now ends the event as if the event
had timed out and finished.
YYYYYY––– –Y
CR00010575 Classifier 3 If the command create classifier=x innervlanid=y was entered, then the
configuration from show config dynam or create config displayed the
command as create classifier=x innervlanid=y innertpid=8100, even
though the entered command had not specified the innertpid value.
This issue has been resolved. The command create classifier=x
innervlanid=y no longer sets the innertpid value.
––––––––YY–
CR Module Level Description
AR400 AR7x5 AR7x0S Rapier i Rapier w AT-8800 AT-8600 AT-8700XL x900-48 AT- 9900 AT-9800